Welding turntables with hollow spindle 

JD 2-100 HOLLOW SPINDLE Ø 100 MM
• Weight capacity 200 kg
• Tilting torque 60 kgm
• Rotation torque 30 kgm
• Table Ø 550 mm, three T radial slots stepped 120°
• Manual tilting from 0° to 135° by gearing and hand wheel
• Speed range from 0.1 to 4 rpm driven by DC motor with
tacho generator
• Weld ground : 400 A
• Remote control by push-button set
• Feeding : 230V 50-60 Hz

 JD 5 HOLLOW SPINDLE Ø 200 MM
• Weight capacity 500 kg
• Tilting torque 200 kgm
• Rotation torque 100 kgm
• Table Ø 750 mm, four T radial slots stepped 90°
• Motorized tilting from 0° to 135° by AC self-brake gear-motor
• Speed range 0.05 to 2 rpm driven by brushless motor and encoder
• Weld ground : 400 A
• Remote control by push-button set

 JD BF JODA BI-FACE HOLLOW SPINDLE Ø 200 MM MOTORIZED TILT 180°
• Weight capacity 300 kg
• Tilting torque 120 kgm
• Rotation torque 60 kgm
• Table Ø 750 mm
• Motorized tilting from 0° to 180° in 30 sec
• Speed range from 0.1 to 2 rpm (other ranges on demand)
• Weld ground : 400 A
• Switch to select MIG / TIG with cold wire
• Work cycle: delayed start, 360° + x° overlapping, – x° backstroke
• Remote control by push-button set

 

JD10S400 JODA HOLLOW SPINDLEØ 400 MM
• Weight capacity 1000 kg
• Tilting torque 200 kgm
• Rotation torque 100 kgm
• 3-jaws chuck, hollow spindle Ø 400 mm
• Motorized tilting from 0° to 135°
• Speed range 0.05 to 2 rpm (other ranges on
demand)
• Weld ground : 400 A
• Remote control by push-button set.

 JDHE HOLLOW SPINDLE Ø 200 OR 260 MM ELEVATING POSITIONER
JDHE is a turn & lift welding turntables with hollow spindle specially designed for handling pipes with elbows or T branches that can be laid on fixed height dollies. The table moves up and down.
The hollow spindle (Ø 200 or 260 mm accordingly to the installed chuck) allows to introduce the pipe through the rear side, to observe welding through the inside of the pipe and to feed the back-up gas as well.
Lift transmission is protected by bellows.